Plastic pots should pay attention to its bearing capaci […]
Plastic pots should pay attention to its bearing capacity when used, because if the bearing capacity exceeds the bearing capacity, it will damage the plastic basin, so we have to pay special attention to this problem, so that we can get better results in later use. See how to control?
Regardless of the quality of the plastic basin, it has a range of tolerance. If it exceeds this range, it will have problems such as deformation and aging. Because the plastic barrel is not brittle, rust-free, oil-resistant, and highly corrosive, the scope of application. It is very wide; it is no problem to hold salt, alkali and other mixtures at room temperature. There is a problem here. Plastic basins cannot be used to hold strong oxidizing liquids, such as sulfuric acid with a temperature exceeding 60 degrees, a concentration of more than 75%, and concentrated nitric acid at a concentration higher than 30%. No. It can be seen that when purchasing the products of the plastic basin manufacturers, the key and important control of the bearing capacity can avoid many application abnormalities.
As can be seen from the above summary, the plastic basin should pay attention to the corresponding problems when carrying out this link, so that it can get better results after use. The above must pay special attention to the bearing capacity of the plastic basin, so that it can be used for a longer period of time.